电池针刺试验机通过针刺试验检验电池的安全性能，通过实时试验数据(如电池电压、电池表面最高温度、压力视频数据进行实验结果判定)针刺试验结束后电池应不起火，不爆炸、不冒烟；也是各电池厂家及研究所必不可少的检测设备。

Battery nail penetrating test equipment checks battery safety performance by nail penetrating test, judge test result by real time test data(like battery voltage, max temperature of battery surface, pressure video data), battery should no fire, no explosion, no smog after nail penetrating test; it is an essential test equipment for battery manufacturers and research institute.

Qc743老标准要求 Qc743 Old Standard Requirement：
用直径ψ3mm~ψ8mm的耐高温钢针、以lOmm/s~40mm/s的速度，从垂直于蓄电池模块极板的方向贯穿至少三个蓄电池单体(钢针停留在蓄电池中)

With diameter ψ3mm~ψ8mm high temperature resistant steel needle, lOmm/s~40mm/s speed, penetrate at least three storage battery monomer from vertical direction of store battery module pole board(steel needle stay in the storage battery)

Qc743新标准要求Qc743 New Standard Requirement：
用ψ6mm~ψlOmm的耐高温钢针(针尖的角度为60度，针的表面光洁、无锈蚀、氧化层及油污)、以20~30mm/s的速度，从垂直于蓄电池极板的方向，直至贯穿3个单体蓄电池(钢针停留在蓄电池中。试验后观察1h)

With diameter ψ6mm~ψ10mm high temperature resistant steel needle(the angle of needle point is 60 degree, needle surface finish, no corrosion, oxide layer and oil stain), 2Omm/s~30mm/s speed, from vertical direction of store battery module pole board, penetrate till three monomer storage battery(steel needle stay in the storage battery, observe 1h after test)